Table of Contents
Advertisement
5. Lenses & lens holder
3. Place the lens holder in the "unlocked" position by moving the lens lock handle (1) towards the lens power supply socket (2).
3
2
Image 5-13
Unlock lens holder
4. Ensure that the lens holder stands in the On-Axis position (horizontal and vertical mid position).
Note: The lens holder is placed default in the On-Axis position at factory.
5. Gently insert the lens in such a way that the lens connector matches the socket.
Image 5-14
Mount lens
6. Insert the lens until the connector seats into the socket.
-
the pin (3) on the lens holder matches with the sleeve in the lens.
-
the connector seats into the socket (2)
Warning:
Do not release the Lens yet, as the Lens may fall out of the Lens Holder.
7. Secure the lens in the lens holder by sliding the lens lock handle into the "locked" position, which is away from the lens power
supply socket. Ensure the lens touches the front plate of the lens holder.
50
1
R59770491 DPXK-32B 17/09/2012
Advertisement
Table of Contents
