Convergence; Open The Sealed Compartment - Barco DP K-32B Series User And Installation Manual

12. CONVERGENCE

About this chapter
This chapter describes how to prepare the projector for convergence adjustment and how to adjust the convergence.
Overview
•

Open the sealed compartment

• Close the sealed compartment
• Convergence controls
• Red on blue convergence
• Green on blue convergence
12.1 Open the sealed compartment
This procedure assumes that the side cover of the projector is already removed.
C
AUTION
Necessary tools
3 mm Allen wrench
How to open the sealed compartment
1. Remove both hexagon head cap screws (1).
Image 12-1
Sealed cover fixation
2. Lift up the cover plate slightly using both lower lips (2) and then remove the cover by taking it away from the projector.
R59770491 DPXK-32B 17/09/2012
:
This procedure may only be done by a qualified and trained service technician.
1
12. Convergence
99