Square And Full Jaw Scan - Dentsply Sirona Primescan Connect Operating Instructions Manual

5 Operation
5.2 Scanner guide
42
5.2.6

Square and full jaw scan

You can use different scanning procedures for scanning a quadrant or a
full jaw. Find two procedures as follows to help you gain access should
such help be necessary.
Procedure 1
1. Start with the oral surface of the anterior teeth and move the
scanner in the oral direction along the quadrant. Move the scanner
over the distal tooth to the vestibular side and track the first
quadrant to the anterior teeth. Gently tilt the scanner approx. 30° in
the coronal-apical direction.
2. Move the scanner as shown below (1) for the second quadrant.
3. Then scan the anterior teeth from cuspid to cuspid in the coronal-
apical direction. Ensure that both the labial surface and the oral
surfaces are visible.
Extend this third scan to locations where you can view scan holes.
Dentsply Sirona
Operating Instructions Primescan Connect
67 97 216 D3801
D3801.201.01.03.02 2022-09