Battery Discharge Indicator; Battery Discharge Indicator (T) - Jungheinrich ECE 220 Operating Instructions Manual

Hide thumbs Also See for ECE 220:
Table of Contents

Advertisement

7

Battery discharge indicator

7.1

Battery Discharge Indicator (t)

When the truck has been released via the key
switch or CANCODE, the battery charge status is
displayed.
The colours of the LEDs (12) represent the following conditions:
LED colour
Green
Orange
Green/orange
Flashing 1 Hz
Red
Flashing
red 1 Hz
Flashing red
0.5 Hz
Z
When a battery has been discharged to its minimum level, the LED is lit red and load
lifting is inhibited. Lifting is only released when the battery connected is at least 70 %
charged.
The status display is reset to 100% when the battery type is adjusted.
Z
If the LED flashes red and the truck is not ready for operation, inform the
manufacturer's service department. Red flashing is a fault code of the truck controller.
The flashing sequence indicates the type of fault.
E 30
Battery is charged
Battery residual capacity approx. 50%
Last 10% available capacity has been reached
Below battery residual capacity minimum level
Error (decimal digits)
Error (unit digits)
12
Meaning

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ece 225Ece 220xlEce 225xl

Table of Contents