Maintenance Checklist - Jungheinrich ECE 220 Operating Instructions Manual

4

Maintenance checklist

Brake 1.1 Check magnetic brake air gap
Electrics 2.1 Test of instruments, displays and control switches
2.2 Test warning and safety device.
2.3 Check fuse ratings.
2.4 Make sure wire connections are secure and check for
2.5 Test micro switch setting
2.6 Check contactors and relays.
2.7 Safety switch
2.8 Wire and motor attachment
2.9 Check carbon brush wear, replace if necessary
Power 3.1 Visually inspect battery.
supply
3.2 Check battery cable connections are secure, grease
3.3 Check acid density, acid level and battery voltage
Travel 4.1 Check transmission for noise and leakage
4.2 Replace gear oil if service life exceeded (10,000 hours)
4.3 Test travel mechanisms, adjust and lubricate if necessary,
4.4 Check wheels for wear and damage
4.5 Check wheel suspension and attachment.
Truck 5.1 Test the operator platform and check for damage
structure
5.2 Check chassis for damage.
5.3 Check labels.
F 4
damage.
terminals if necessary.
carry out tiller recuperation test.
Maintenance Intervals
= t W A B C
Standard
= k
Cold store
t
t
k t
t
t
t
t
t
t
k t
k t
k t
k t
t
t
k t
t
t
t
t