Controls And Displays - Jungheinrich ECE 220 Operating Instructions Manual

2

Controls and Displays

Item Control / Display
1 Main switch / isolator
(emergency disconnect)
2 "Horn" button
3 "Lower" button
4 "Lift" button
5 Brake button
6 Controller
7 Jet Pilot
Tiller
8 Forward "pedestrian / walk-
along operation" button
9 Stop button
10 Reverse "pedestrian / walk
along" button
(not for "Touch mode only in
drive direction" option)
t = Standard equipment
E 2
Function
t The circuit is interrupted, all electrical
functions are cut out and the truck
automatically brakes.
t Triggers a warning signal.
t Lowers the lift mechanism.
t Raises the lift mechanism.
t The truck brakes at the maximum rate until
it comes to a halt.
t Controls the direction of travel and the
travel speed.
t
Steers the truck.
o
Steers the truck.
o Travel starts in pedestrian mode in the
forward direction (V)
(slow travel).
o The electrical functions are deactivated
and the truck automatically brakes.
o Travel starts in pedestrian mode in the
reverse direction (R)
(slow travel).
o = Optional Equipment