2Nd Level Stockpicking (O) - Jungheinrich ECE 220 Operating Instructions Manual

4.5

2nd level stockpicking (o)

The operator position is designed so that the driver can climb onto the step (18) using
the grab handle (17). The driver can climb onto the battery panel (19) if necessary via
the step board (18).
F
When picking at the 2nd level the operator must only hold onto the grab handles (17)
on the raised backrest, not the Jet Pilot or the tiller (o)! The operator must not press
any controls while carrying out this activity. Special attention is required when
standing on the battery panel.
A rail (20, o) for the battery panel will improve safety.
20
19
17
18
E 15