Program-independent parameters
Z
For trucks without a display instrument (CANDIS (o)) the
only be set by the manufacturer's service department.
The parameters are set in the same way as for the travel parameters.
The following parameters may be entered.
No.
Battery parameters
411 Battery type (normal /
high performance / dry)
412 Discharge monitor
function
Setting 0 / 1 is to be interpreted as: 0 = off 1 = on
6
ISM (o)
Z
If the truck is equipped with an ISM access module see "ISM Access Module".
Function
Setting
Standard
range
setting
0 - 2
0
0 / 1
1
parameters can
BATTERY
Comments
0 = Normal (wet)
1 = high performance
(wet)
2 = Dry
(maintenance-free)
E 29