Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna TC 85 2020 Owner's Manual

11.27

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
11.28

Installing the main silencer

11.29

Changing the glass fiber yarn filling of the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the rock wool dissipate and the silencer "burns out".
Not only is the noise level higher, the performance characteristics change.
SERVICE WORK ON THE CHASSIS 11
Preparatory work
–
Remove the right side cover. (
Main work
–
Remove screw
–
Pull off the main silencer from the manifold at rubber
2
sleeve .
K00982-11
Main work
–
Mount the main silencer with rubber sleeve
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K00982-10
Finishing work
–
Install the right side cover. (
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (
p. 62)
1
.
2
.
M6 10 Nm (7.4 lbf ft)
p. 63)
p. 62)
p. 61)
1
.
61