11.34
Checking for chain dirt accumulation
SERVICE WORK ON THE CHASSIS 11
Main work
–
Check the throttle cable routing. (
–
Position the fuel tank and fit the two spoilers to the sides of
the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or
damaged.
K00971-10
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K00969-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Mount fuel hose.
–
Position the fuel tank breather in the steering stem.
K00968-11
Finishing work
–
Install the right side cover. (
–
Install the air filter box cover. (
–
Mount the seat. (
–
Check the chain for coarse dirt accumulation.
»
If the chain is very dirty:
–
Clean the chain. (
400678-01
p. 71)
1
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
p. 63)
p. 59)
p. 58)
p. 66)
65