14 Cooling System; Radiator Cover; Installing The Radiator Cover - Husqvarna TC 85 2020 Owner's Manual

14 COOLING SYSTEM

14.1
14.2
14.3
94
Cooling system
V01304-10

Radiator cover

H02535-01
V00884-10

Installing the radiator cover

Info
Only remove left radiator shield if both radiator covers are mounted.
1
Water pump in the engine circulates the coolant.
The pressure resulting from the warming of the cooling system is
regulated by a valve in radiator cap
ing the vehicle at the specified coolant temperature will not result
in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins
also reduce the cooling effect.
The radiator covers are mounted in front of the radiator between
the radiator shield and radiator.
Info
Do not use radiator covers in difficult operating condi-
tions.
The radiator cover keeps the coolant temperature in the correct
range.
Optimal coolant 60 ... 70 °C (140 ... 158 °F)
temperature
The radiator covers are installed in front of the radiator, depend-
ing on the ambient temperature.
Full radiator cover < 0 °C (< 32 °F)
1
right side and
half radiator cover
2
left side
Full radiator cover 0 ... 10 °C (32 ... 50 °F)
1
right side
Half radiator cover 10 ... 20 °C (50 ... 68 °F)
2
right side
No radiator cover > 20 °C (> 68 °F)
2
. This ensures that operat-