Checking The Throttle Cable Routing - Husqvarna TC 85 2020 Owner's Manual

11.41

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in the throttle cable comply with the specifica-
tion.
SERVICE WORK ON THE CHASSIS 11
Preparatory work
–
Remove the seat. (
–
Remove the air filter box cover. (
–
Remove the right side cover. (
–
Turn the tap handle of the fuel tap to the OFF position.
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
The throttle cable must be routed along the back of the
handlebar, to the right of the frame, above the fuel tank
bracket, and to the carburetor.
» If the throttle cable routing is not as specified:
–
Correct the throttle cable routing.
V01292-01
Finishing work
–
Install the fuel tank.
–
Install the right side cover. (
–
Install the air filter box cover. (
–
Mount the seat. (
p. 58)
p. 58)
p. 62)
( p. 63)
( p. 64)
p. 63)
p. 59)
p. 58)
71