Removing The Seat; Mounting The Seat; Removing The Air Filter Box Cover - Husqvarna TC 85 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.20
11.21
11.22
58

Removing the seat

K00964-10

Mounting the seat

K00987-01
K00964-10

Removing the air filter box cover

S03458-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove screw .
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Pull off the air filter box cover laterally in areas
off toward the front.
p. 46)
1
of the seat fixing.
M6 10 Nm (7.4 lbf ft)
A
and take it