14 COOLING SYSTEM
14.4
14.5
96
Removing the radiator cover
Info
Only remove left radiator shield if both radiator covers are mounted.
H02536-10
Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or
the cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator
hoses or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
–
1
Remove screws
.
–
Remove right radiator shield
–
3
Remove screws
.
–
Remove left radiator shield
–
Remove corresponding radiator cover.
–
Position right radiator shield
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Position left radiator shield
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
Condition
The engine is cold.
2
.
4
.
2
.
1
.
M6
10 Nm (7.4 lbf ft)
4
.
3
.
M6
10 Nm (7.4 lbf ft)