Substances 21 - Husqvarna TC 85 2020 Owner's Manual

Brake fluid DOT 4 / DOT 5.1
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that
exhibits the corresponding properties.
Recommended supplier
Castrol
–
REACT PERFORMANCE DOT 4
®
MOTOREX
–
Brake Fluid DOT 5.1
Coolant
Guideline
–
Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade
and unsuitable antifreeze causes corrosion, deposits and frothing.
–
Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion pro-
tection and lubrication properties.
–
Only use coolant that complies with the requirements stated (see specifications on the container) and that
has the relevant properties.
Antifreeze protection to at least
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant
needs to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility)
with other coolants.
Recommended supplier
®
MOTOREX
–
COOLANT M3.0
Engine oil (15W/50)
Standard/classification
–
JASO T903 MA2 ( p. 129)
–
SAE ( p. 129) (15W/50)
Guideline
–
Use only engine oils that comply with the specified standards (see specifications on the container) and that
possess the corresponding properties.
Recommended supplier
®
MOTOREX
–
Top Speed 4T
Engine oil, 2-stroke
Standard/classification
–
JASO FD ( p. 129)
Guideline
–
Only use high grade 2-stroke engine oil of a reputable brand.
Fully synthetic
−25 °C (−13 °F)

SUBSTANCES 21

125