Preparing The Vehicle For Riding On Wet Sand - Husqvarna TC 85 2020 Owner's Manual

7.5

Preparing the vehicle for riding on wet sand

–
Make sure that no radiator covers (
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
V00814-01
–
Change the radiator cap.
–
Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from
your authorized Husqvarna Motorcycles workshop.
–
Clean the chain.
Chain cleaner (
–
Grease the chain.
M01107-01
Universal oil spray (
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
PREPARING FOR USE 7
p. 94) are installed.
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
p. 127)
p. 128)
25