Husqvarna TC 85 2020 Owner's Manual page 77

SERVICE WORK ON THE CHASSIS 11
–
Inject the liquid into the system until it escapes from open-
A
ing of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
K00990-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
4 mm (0.16 in)
75