Husqvarna TC 85 2020 Owner's Manual page 101

Main work
–
Make sure that screw
–
Position the motorcycle upright.
–
Take off radiator cap
–
Completely fill the radiator with coolant.
Coolant (
V01304-11
–
Loosen screw
–
Mount and tighten screw
Guideline
Screw, radiator
bleeding
–
Completely fill the radiator with coolant.
Coolant (
K00974-10 –
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the coolant level. (
Finishing work
–
Check the cooling system for leaks.
COOLING SYSTEM 14
1
is tightened.
2
.
p. 125)
3
until coolant escapes without bubbles.
3
.
M6 8 Nm (5.9 lbf ft)
p. 125)
2
.
p. 97)
99