11.10
Installing the lower triple clamp
SERVICE WORK ON THE CHASSIS 11
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Slide on O-ring
–
Position protective ring
V00489-10
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
S03429-11
–
Position the fork legs.
Air bleeder screw
the front.
A
Valve
Info
The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
H02312-12
rebound and compression damping is located in the
right fork leg.
p. 127)
1
.
2
.
3
.
, but do not tighten it yet.
5
of the right fork leg is positioned to
of the left fork leg faces the front.
51