Installing The Air-Duct Option - Lenovo RackSwitch G8332 Installation Manual

Installing the Air-Duct Option

48
G8332 Installation Guide
The G8332 supports an optional 1U air duct to maximize air flow conditions in a
19" rack.
For information on removing an installed 1U air‐duct option, see "Removing the
Air‐Duct Option" on page
The following table lists the parts included with the air‐duct option kit.
Table 12.
Air‐duct Option Kit parts
Item Number Description
1 Cable tie
2 1U Duct sleeve (long)
3 Mounting bracket (left)
4 Mounting bracket (right)
5 Foam carrier assembly
6 M3.5 screws
Attention: The rack‐mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2‐post application).
If the switch has an undesirable amount of sag, it is recommended to use a 4‐post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4‐post rack.
75.
6
5
1
Quantity
4
1
1
1
2
6