Lenovo RackSwitch G8332 Installation Manual page 62

Lenovo network operating system

Hide thumbs Also See for RackSwitch G8332:

Table of Contents

1. Remove the power cord from the module's power connector.

2. Press the release latch of the power supply module, and slide the module out of the

G8332 Installation Guide

To remove a hot‐swap power supply module, complete the following steps:

bay.

Attention: Do not leave the power‐supply bay empty for more than 90 seconds

while the switch is operating. Either replace the power supply module or install a

blank power filler plate.

To return the component to customer service for replacement, see Appendix A,

"Getting Help and Technical Assistance" to help you gather all the required

information that is necessary to return a component. After you remove the

component, securely pack the component for shipping.

Table of Contents