5. Secure the switch to the front rack posts with M6 screws (Item 3), washers (Item 5),
and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/‐ 0.1 Nm (50
inch‐pounds).
6. Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws (Item
3), washers (Item 5), and clip nuts (Item 4). Torque the screws to approximately 5.7
Nm +/‐ 0.1 Nm (50 inch‐pounds).
If installing the 1U air‐duct option, see the instruction on page
7.
Connect all external cables in accordance with the "Cabling Guidelines" on
8.
page
9.
Initialize the switch. See Chapter
10.
If the switch is a replacement unit, set Vital Product Data (see "Configuring Vital
Product Data" on page
© Copyright Lenovo 2017
4
5
3
4
5
3
37.
76).
7
5, "Initializing the G8332".
Chapter 3: Installing G8332 Hardware and Options
48.
47