Lenovo RackSwitch G8332 Installation Manual page 44

7. Attach the filler plate (Item 9) and rear mounting brackets to the rear rack posts
8. Secure the rear brackets to the front brackets with M3.5 screws (Item 6). Torque the
9.
10.
11.
12.
44
G8332 Installation Guide
with M6 screws (Item 3), washers (Item 10), and either clip nuts (Item 4) or cage
nuts (Item 5). Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50
inch‐pounds).
9
screws to approximately 0.5 Nm (4 inch‐pounds).
7
If installing the 1U air‐duct option, see the instruction on page
Connect all external cables in accordance with the "Cabling Guidelines" on
page 37.
Initialize the switch. See Chapter
If the switch is a replacement unit, set Vital Product Data (see "Configuring Vital
Product Data" on page
3
10
1
6
8
5, "Initializing the G8332".
76).
5
48.