Table of Contents
Advertisement
Installing the Air-Duct Option
© Copyright Lenovo 2018
The NE10032O supports an optional 1U air duct to maximize air flow conditions in
a 19" rack.
The air‐duct option is only supported when the switch is installed on a 4‐post rack
mount kit basis. If the switch is installed on a rack using default 2‐post rack mount
kit, it will not support the air‐duct option.
For information on removing an installed 1U air‐duct option, see "Removing the
Air‐Duct Option" on page
The following table lists the parts included with the air‐duct option kit.
Table 9.
Air-duct Option Kit parts
Item Number
Description
1
Cable tie
2
1U Duct sleeve (long)
3
Mounting bracket (left)
4
Mounting bracket (right)
5
Foam carrier assembly
6
M3.5 screws
Attention: The rack‐mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2‐post application).
If the switch has an undesirable amount of sag, it is recommended to use a 4‐post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4‐post rack.
61.
6
5
Chapter 3: Installing NE10032O Hardware and Options
1
Quantity
4
1
1
1
2
6
43
Advertisement
Table of Contents
