Lenovo RackSwitch G8332 Installation Manual page 40

3. From the front, slide the switch into the rack at the desired height.
4. Secure the switch unit to the rack posts with M6 screws (Item 3), washers (Item 6),
5.
6.
7.
8.
40
G8332 Installation Guide
and either clip nuts (Item 4) or cage nuts (Item 5). Torque the screws to
approximately 5.7 Nm ± 0.1 Nm (50 inch‐pounds).
3
6
If installing the 1U air‐duct option, see the instruction on page
Connect all external cables in accordance with the "Cabling Guidelines" on
page 37.
Initialize the switch. See Chapter 5, "Initializing the G8332", on page
If the switch is a replacement unit, set Vital Product Data (see "Configuring Vital
Product Data" on page
4
76).
48.
79.