Lenovo RackSwitch G8332 Installation Manual page 39

Statement 26
1. Locate, record, and retain the product switch information in order to configure and
register your product. See "Before Installing the G8332" on page
2. Attach a mounting bracket (Item 1) to each side of the switch with M4 screws (Item
2). Torque the screws to approximately 2.0 newton‐meters (Nm) ± 0.1 Nm (17.7
inch‐pounds).
© Copyright Lenovo 2017
CAUTION:
Do not place any object on top of rack‐mounted devices.
To install the G8332 in a standard equipment rack, complete the following steps:
Note: If this switch is a replacement switch, copy the product information from the
original switch onto the RID label that is shipped with replacement switch and
affix the new label to the bottom of the new switch.
1
Chapter 3: Installing G8332 Hardware and Options
32.
2
39