Required Tools; Package Contents - Lenovo RackSwitch G8332 Installation Manual

Required Tools

Package Contents

© Copyright Lenovo 2017
For convenience, once the G8332 is installed and initialized, you can use the
following command in the switch firmware interface to display the product serial
number and other required information.
 for Lenovo Enterprise Network Operating System (ENOS):
G8332> show sys­info
 for Lenovo Cloud Network Operating System (CNOS):
G8332> display sys­info
For more information, see "Configuring Vital Product Data" on page
You need the following tools or equipment to install the G8332:
 Standard flat‐blade screwdriver
 #2 Phillips screwdriver
 Electrostatic discharge wrist strap
The basic G8332 package contains the following items:
One RackSwitch G8332 unit with front‐to‐rear or rear‐to‐front airflow

 One two‐post mounting kit for standard 19" equipment racks:
Two mounting brackets

Screws to attach brackets to the switch unit

Screws to attach the switch unit to the equipment rack

 One console cable kit that includes:
One Mini‐USB to RJ‐45 serial cable

One Category 5 patch cable

One DB9 to RJ‐45 adapter

 One Documentation CD, which includes the Systems Information document
 One Environmental Notices CD
 One Important Notices document
 One Warranty Information document
For a list of compatible switch components and options (such as rack‐mounting
kits, modules, cords, and cables), see the Lenovo Networking Catalog.
Chapter 3: Installing G8332 Hardware and Options
76.
33