Table of Contents
Advertisement
Machine installations must comply with minimum
specifications and requirements stated in the appli-
cable Installation Manual, any applicable municipal
building codes, water supply requirements, electrical
wiring regulations and any other relevant statutory
regulations. Due to varied requirements and applica-
ble local codes, this machine must be installed, ad-
justed, and serviced by qualified maintenance per-
sonnel familiar with applicable local codes and the
construction and operation of this type of machinery.
They must also be familiar with the potential hazards
involved. Failure to observe this warning may result
in personal injury, property damage, and/or equip-
ment damage, and will void the warranty.
Dangerous voltages are present inside the machine.
Only qualified personnel should attempt adjustments
and troubleshooting. Disconnect power from the ma-
chine before removing any cover and guards, and
before attempting any service procedures.
IMPORTANT: Ensure that the machine is installed on a
level floor of sufficient strength. Ensure that the recom-
mended clearances for inspection and maintenance are
provided. Never allow the inspection and maintenance
space to be blocked.
Never touch internal or external steam pipes, con-
nections, or components. These surfaces can be ex-
tremely hot and will cause severe burns. The steam
must be turned off and the pipe, connections, and
components allowed to cool before the pipe can be
touched.
Install the machine on a level floor of sufficient
strength. Failure to do so may result in conditions
which can produce serious injury, death and/or prop-
erty damage.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
WARNING
unique_2_Connect_42_note-1620386288890
WARNING
unique_2_Connect_42_note-1620386292827
WARNING
unique_2_Connect_42_note-1620386301369
WARNING
unique_2_Connect_42_note-1620386305525
Never interfere with the setting of the door handle.
Never try to modify the setting or repair the handle!
Any interference with its setting may lead to serious
risk for the operator! A damaged or incorrectly func-
tioning door handle must always be immediately re-
placed with a new original part.
To avoid premature bearing failure, do not operate
the machine while the basket is empty.
•
Electrical disconnect must be located so that it is easily acces-
sible with the machine in place. Machine must be hard-wired.
An intermediate shut-off box that provides all pole disconnec-
tion from the supply mains must be used in compliance with
all local electrical codes.
NOTE: All appliances are produced according the EMC-
directive (Electro-Magnetic-Compatibility). They can be
used in restricted surroundings only (comply minimally
with class A requirements). For safety reasons there
must be kept the necessary precaution distances with
sensitive electrical or electronic device(s). These ma-
chines are not intended for domestic use by private
consumers in the home environment.
Safety Decals
Safety decals appear at crucial locations on the machine. Failure
to maintain legible safety decals could result in injury to the oper-
ator or service technician.
Use manufacturer-authorized spare parts to avoid safety hazards.
Operator Safety
NEVER insert hands or objects into basket until it
has completely stopped. Doing so could result in se-
rious injury.
The following maintenance checks must be performed daily:
1. Verify that all warning labels are present and legible, replace
as necessary.
2. Check door interlock before starting operation of the ma-
chine:
7
Safety Information
WARNING
unique_2_Connect_42_note-1620386309236
CAUTION
unique_2_Connect_42_note-1620386314099
WARNING
Part No. D1599ENR14
SW012
Hide quick links:
Advertisement
Table of Contents
