Connecting Hoses - ALLIANCE AR105M_X_CONTROL Installation Operation & Maintenance

Cabinet hardmount
Table of Contents

Advertisement

Installation

Connecting Hoses

To comply with Australian water regulations and Australian
standard AS/NZS3500.1, an approved dual check valve backflow
prevention device with the watermark is provided with the unit
and must be fitted at the point of connection(s) between the sup-
ply and the fitting. Refer to Figure 22 .
Figure 21
Connections should be supplied by a hot and a cold water line per
national and local codes and in accordance with AS/NZS 3500.1.
1. Insert rubber washers and filter screens (from accessories
bag) in water fill hose couplings (two hoses supplied with
washer). The filter screen must be facing outward.
NOTE: If using hoses with BSPP thread coupling, in-
sert filter screens into the BLACK colored hose cou-
plings and the rubber washers into the brass col-
ored hose couplings.
2. Connect fill hose couplings with filter screens to water supply
taps.
3. Connect the other hose couplings to the hot and cold valve
connections at the rear of the washer.
NOTE: If using hoses with BSPP thread coupling,
connect the BLACK colored hose coupling end of
the fill hoses (with filter screens) to the water supply
taps. Then connect end of hoses with the brass col-
ored hose couplings to the hot and cold water mix-
ing valve connections at rear of washer.
4. Thread hose couplings onto valve connections finger tight.
Then turn 1/4 turn with pliers.
IMPORTANT: DO NOT cross thread or overtighten
couplings. This will cause them to leak.
5. Turn water on and check for leaks.
6. If leaks are found, retighten the hose couplings.
7. Continue tightening and rechecking until no leaks are found.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7
6
5
CZB92N
1. Tap
2. Fill Hoses
3. Install this end of hose to valve connections at rear of
washer
4. Plain Rubber Washer
5. Install this end of hose to water supply tab (Black colored
coupling for BSPP thread)
6. Filter Screens
7. Dual Check Valves
44
1
COLD
HOT
2
Figure 22
4
3
FLW2216N_SVG
Part No. D1599ENR14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar105m_x_control plusAr105n_x_controlAr105n_x_control_plusAr135m_x_controlAr135m_x_control_plusAr135n_x_control ... Show all

Table of Contents