AMU Powercon
Product Description
1.
1.1.
Application
Range
Special
Features
Signal
Outputs
Relays
A-96.250.331 / 230320
Product Description
Description of the System
This instrument is applicable for the measurement of conductivity in
high purity water applications.
The AMU Powercon measures the specific (total) conductivity or
the acid (cation) conductivity of a sample. For the measurement of
the acid conductivity a cation exchanger bottle is necessary. The
transmitter can be used with a two-electrode conductivity sensor
with an integrated Pt1000 temperature sensor, e.g. Swansensor
UP-Con1000.
The conductivity is a parameter for the total quantity of ions present
in the solution. It can be used for the controlling of:
the condition of waters
water purification
water hardness
completeness of ion analysis
Many temperature compensation curves for specific conductivity
measurement:
none
Coefficient
Neutral salts
High-purity water
Strong acids
Strong bases
Ammonia, Eth. am.
Morpholine
Two signal outputs programmable for measured values (freely scal-
able, linear, bilinear, log) or as continuous control output (control
parameters programmable).
Current loop:
Maximal burden:
Two potential-free contacts programmable as limit switches for
measuring values, controllers or timer for system cleaning with au-
tomatic hold function.
Maximum load: 100 mA/50 V
0/4–20 mA
510 Ω
3