Copying Sequence - Sharp MX-2300G Manual

COPYING SEQUENCE

Select settings in the order shown below to ensure that the copy operation takes place smoothly. For detailed
procedures for selecting the settings, see the explanation of each setting in this guide.
Full Colour
Auto
Colour Mode
Original
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
2-Sided Copy
Place the original.
Basic copy settings
2-Sided Copy
Auto A4
Paper Select
Output
Plain
A4
Special Modes
Special Modes
File
Quick File
2-sided copy settings
OK
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
* Depending on the copy functions used, there are also cases
where functions are selected before the original is placed.
Select the basic copy settings.
The main settings are as follows:
☞
• Colour mode COPY COLOUR MODES
• Exposure and exposure mode
☞
CHANGING THE EXPOSURE AND EXPOSURE MODE
(page 23)
• Copy ratio
☞
REDUCTION/ENLARGEMENT/ZOOM
☞
• Original size ORIGINAL SIZES
• Paper settings
Select settings as needed for 2-sided copying and 2-sided
scanning of the original.
☞
AUTOMATIC 2-SIDED COPYING
8
(page 21)
(page 26)
(page 33)
(page 15)