Sharp MX-2300G Manual page 7

Hide thumbs Also See for MX-2300G:
Table of Contents

Advertisement

(9)
Paper select display
This shows the size of paper loaded in each tray.
In the bypass tray area, the paper type appears above
the paper size.
The selected tray is highlighted.
The approximate amount of paper in each tray is
indicated by
. To display the paper tray selection
screen for a tray, touch the tray.
(10) Number of copies display
This shows the number of copies set.
(11) [2-Sided Copy] key
Touch this to make 2-sided copies.
AUTOMATIC 2-SIDED COPYING
(12) [Output] key
Touch this to select an output function such as sort,
group, offset, staple sort, saddle stitch, or punch.
OUTPUT
(page 42)
When the system settings screen is displayed, the base screen of copy mode will not appear even if the [COPY] key is
pressed.
[Job Detail Settings] key
When the [Job Detail Settings] key is touched, keys for selecting the original size and paper settings appear. The
[Special Modes] key also appears to allow the selection of special modes. To close the job detail settings screen and
return to the base screen, touch the [Job Detail Settings] key once again.
(1)
[Original] key
Touch this key to select the original size setting.
ORIGINAL SIZES
(2)
[Paper Select] key
Touch this key to change the paper (tray) that is used.
When the key is touched, each tray and the size and type of
paper in that tray will appear . Touch the key of the paper
tray that you wish to use and then touch the [OK] key.
The paper size and paper type settings for trays 1 to 5
are configured in the system settings.
System Settings Guide "Paper Tray Settings"
For information on the paper size and paper type settings
for the bypass tray, see the
BYPASS TRAY (Copying on special
Paper Select
A4
A4R
B4
A3
(page 15)
Full Colour
Colour Mode
Original
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
(page 33)
"MAKING COPIES USING THE
papers)" (page 46).
A4
Plain
Plain
Plain
Plain
A4
Plain
Plain
(13) Customized keys
These 3 keys can be changed to show any 3 settings or
functions that you like. The keys are changed in
"Customize Key Setting" in the system settings
(administrator). Normally the following keys appear:
• [Special Modes] key
• [File] key, [Quick File] key
(1)
(2)
Auto
Auto
A4
Paper Select
Special Modes
(3)
[Special Modes] key
Touch this key to select special modes such as Margin
Shift, Edge Erase, and Dual Page Copy.
OK OK
6
Customizing displayed keys
This is the same [Special Modes] key that appears
when the [Job Detail Settings] key is touched.
SPECIAL MODES
(page 54)
Touch either key to use the Quick File or File of the
document filing functions. These are the same [File]
and [Quick File] keys that appear when the [Special
Modes] key is touched. For information on the
document filing function, see the Document Filing
Guide.
(3)
2-Sided Copy
Output
Plain
A4
Special Modes
A4
File
Quick File
SPECIAL MODES
(page 54)
(page 7)

Advertisement

Table of Contents
loading

Table of Contents