Sharp MX-2300G Manual page 90

Special Modes
Multi Shot
2in1 4in1
(1)
4
5
To cancel scanning of the original and copying...
Press the [STOP] key (
OK
Cancel OK
Layout Border
(2) (3)
or
).
Select the number of originals to be
copied onto one sheet of paper, the
layout, and the border.
(1) Touch the [2in1] or the [4in1] key.
If needed, the images will be rotated.
(4)
(2) Select the layout.
Select the order in which the originals will be arranged on
the copy.
Shot number
2in1
4in1
The arrows in the above diagram indicate how the images
are arranged.
(3) Select the border.
Solid lines, broken lines, or no lines can be selected.
(4) Touch the [OK] key.
You will return to the base screen of copy mode.
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key (
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time. If you are using the sort function or other
function that requires all originals to be scanned before the
copies are printed, you must use the same [START] key that
you used to scan the first original to scan each of the
remaining originals.
89
Layout
).