Sizes - Sharp MX-2300G Manual

Original
X
420
X
Y
Y 297
Standard Size
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
4
Settings
Auto
Exposure
100%
Copy Ratio
STORING FREQUENTLY USED ORIGINAL SIZES
You can save special original sizes that you frequently use. This section explains how to store, call up, change, and
delete special original sizes.
Storing original sizes
Up to 9 special original sizes can be stored.
Ready to scan for copy.
Full Colour
Colour Mode
1
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
(64 432)
mm
(64 297)
mm
Size Input
(2), (3) (1)
X 420
2-Sided Copy
Manual
Y 297
Output
Plain
A4
Special Modes
A4
1.
A4R File
2.
B4
3.
A3
4. Quick File
2-Sided Copy
Original
A4
Output
Plain
A4
Special Modes
A4
1.
File
A4R
2.
B4
3.
A3 Quick File
4.
● Specifying a non-standard original size
(1) Touch the [Size Input] tab.
(4)
(2) Enter the X (horizontal) dimension of the
original.
OK OK
Auto
With the [X] key highlighted, enter the X (horizontal)
Manual
dimension of the original with the
the document glass is used, a dimension from 64 mm to
Custom
Size
432 mm (2-1/2" to 17") can be entered.
When an automatic document feeder is installed, a
dimension from 140 mm to 432 mm (5-1/2" to 17") can be
entered.
If the length or width of the original is less than 140 mm
(5-1/2"), use the document glass.
(3) Enter the Y (vertical) dimension of the original.
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
glass is used, a dimension from 64 mm to 297 mm (2-1/2"
to 11-5/8") can be entered.
When an automatic document feeder is installed, a
dimension from 131 mm to 297 mm (5-1/8" to 11-5/8") can
be entered.
If the length or width of the original is less than 131 mm
(5-1/8"), use the document glass.
(4) Touch the [OK] key.
When the [OK] key is touched, you will return to the job
detail setting screen. Touch the [Job Detail Settings] key
to return to the base screen of copy mode.
Verify that the correct original size is entered.
0
• Make sure that the entered numbers appear in the [Original]
key. If the numbers are not correct, touch the [Original] key
again and enter the correct numbers.
• If the correct numbers appear, touch the [Job Detail Settings]
key to return to the base screen of copy mode. The original
size display in the base screen will show "Manual".
Touch the [Job Detail Settings] key.
0
36
keys. When
keys. When the document