Sharp MX-2300G Manual page 21

7
• Up to 999 can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
8
9
Place next original. Press [Start].
When finished, press [Read-End].
10
To cancel scanning of the original and copying...
Press the [STOP] key (
7
2-Sided Copy
) and then enter the correct number.
or
or
Read-End
).
Set the number of copies (sets) with the
numeric keys.
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key
( ).
Scanning begins.
If you are using the sort function or other function that requires
all originals to be scanned before the copies are printed, you
must use the same [START] key that you used to scan the first
original to scan each of the remaining originals.
Remove the original and place the next
original, and then press the [COLOUR
START] key (
WHITE START] key (
If you are using the sort function or other function that requires
all originals to be scanned before the copies are printed, you
must use the same [START] key that you used to scan the first
original to scan each of the remaining originals.
Repeat this step until all originals have been scanned.
Touch the [Read-End] key.
20
) or the [BLACK &
).
)