Reduction/Enlargement/Zoom; Automatic Ratio Selection; Image) - Sharp MX-2300G Manual

REDUCTION/ENLARGEMENT/ZOOM

AUTOMATIC RATIO SELECTION (Auto Image)
This section explains the automatic ratio selection function (Auto Image), which automatically selects the ratio to match
the paper size.
The reduction or enlargement ratio is selected automatically based on the original size and the selected paper size.
1
Automatic ratio selection cannot be used if the original size or paper size is a non-standard size. If the original size is
a non-standard size, automatic ratio selection cannot be used unless the original size is entered manually.
Full Colour
Colour Mode
Original
Job Detail
Settings
Auto
2
Exposure
100%
Copy Ratio
(1)
Paper Select
A4
A4R
3 B4
A3
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
Settings
Auto
Exposure
4
Auto
100%
Image
Copy Ratio
If the message "Rotate original from
message.
Auto Auto A4
Paper Select
Plain
A4
Special Modes
(2)
A4
Plain
Plain
Plain
Plain
Plain
(1)
Original
A4
Plain
A4
A4
1.
A4R
2.
B4
3.
A3
4.
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Open the paper settings screen.
2-Sided Copy
Output
(1) Touch the [Job Detail Settings] key.
Special Modes
(2) Touch the [Paper Select] key.
File
Quick File
Set the paper size.
OK
(1) Touch the tray that has the desired paper
size.
(2) Touch the [OK] key.
When the [OK] key is touched, you will return to the job
detail setting screen. Touch the [Job Detail Settings] key
(2)
to return to the base screen of copy mode.
Touch the [Auto Image] key.
0
A suitable ratio for the original size and the selected paper size
2-Sided Copy
will be selected. (The selected ratio will appear in the ratio
Output
display.)
Special Modes
File
Quick File
to " is displayed, change the orientation of the original as indicated in the
26