Copying Sequence; Basic Copy Settings - Sharp MX-M283 Operation Manual

COPYING SEQUENCE

This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Exposure
Auto
Copy Ratio Original
100%
Auto
8½x11
2-Sided Copy
Place the original.

Basic copy settings

Special Modes
2-Sided Copy
Plain
8½x11
Output
8½x11
1.
8½x11R
8½x11
2. 5.
File
8½x14
3.
11x17
4.
Quick File
Paper Select
Auto
8½x11
Preview
Plain
2-sided copy settings
OK
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
* Depending on the copy functions used, there are also cases
where functions are selected before the original is placed.
Select the basic copy settings.
The main settings are as follows:
• Exposure and original type
EXPOSURE AND ORIGINAL IMAGE TYPE
☞
• Copy ratio REDUCTION/ENLARGEMENT/ZOOM
(page 2-23)
☞
• Original size ORIGINAL SIZES
☞
• Paper Settings PAPER TRAYS
Select settings as needed for 2-sided copying and 2-sided
scanning of the original.
☞
AUTOMATIC 2-SIDED COPYING
2-6
COPIER
☞
CHANGING THE
(page 2-21)
(page 2-27)
(page 2-11)
(page 2-16)
Contents