Sharp MX-2300G Manual page 147

Colour
Adjustments
Colour Balance
1 2
Y M
C Bk
(1)
5
To return the colour balance values to the default settings...
Touch the
The default colour balance values are set in "Initial Colour Balance Setting" in the system settings (administrator).
6
To cancel scanning of the original and copying...
Press the [STOP] key (
To cancel the colour balance setting...
Touch the [Cancel] key in the screen of step 5.
System Settings (Administrator): Initial Colour Balance Setting
This is used to set the default values to which the colour balance values return when the
Cancel
3 4 5 6 7 8 All
(2), (3)
key. The values of all 8 gradations return to the default colour balance values.
).
Adjust the colour balance.
(4)
Examples of colour balance adjustment
OK
OK
(1) Select the colour to be adjusted.
Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk]
(black).
If only the rectangular area around the letter in a key is
highlighted, the settings have been changed from the
factory default settings.
(2) Select the gradation to be adjusted.
Select the gradation with the
Touch the
of gradations "1" to "8" or "All".
To adjust all eight gradations at once, move the
highlighting to "All".
(3) Adjust the density.
To darken the density of the selected gradation, touch the
key. To lighten the density, touch the
time one of the keys is touched, the indicator frame
moves up or down one level.
(4) Touch the [OK] key.
When the [OK] key is touched, you will return to the
special mode screen. Touch the [OK] key to return to the
base screen of the copy mode.
Press the [COLOUR START] key (
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time.
146
The settings of all gradations
are moved toward +
The settings of all gradations
are moved toward -
keys.
keys to move the highlighting to one
key is pressed.
key. Each
).