Copy Colour Modes; Selecting The Colour Mode - Sharp MX-2300G Manual

Hide thumbs Also See for MX-2300G:
Table of Contents

Advertisement

COPY COLOUR MODES

This section explains how to select the colour mode.
For a colour original, set the colour mode to Full Colour.
If colour originals and black and white originals are mixed together, set the colour mode to Auto.
Full Colour
Single Colour
2 Colour
Auto

SELECTING THE COLOUR MODE

1
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
2
Settings
Auto
Exposure
100%
Copy Ratio
Colour Mode
Full Colour
Auto
3
When auto mode is used, there may be some originals for which the mode is not correctly switched between full colour
mode and black and white mode. In this event, press the [COLOUR START] key (
START] key (
The original is copied in full colour.
The original is copied in the selected colour only.
All colours in the original are changed to the selected colour, which can be selected from red,
green, blue, cyan, magenta, or yellow.
Only the red areas of the original are changed to the selected colour; colours other than red are
copied in black. This lets you make copies that are more expressive than black and white copies.
Red, green, blue, cyan, magenta, or yellow can be selected.
A colour original is normally copied in Full Colour mode when the [COLOUR START] key
(
) is pressed.
However, if colour originals and black and white originals are mixed together, follow the steps
below to set the colour mode to [Auto].
The discrimination point for detecting whether originals are colour or black and white can be
set using "Detect Standard in Auto Colour Mode" in the system settings (administrator).
2-Sided Copy
Original A4
Plain
A4
Special Modes
A4
1.
A4R
2.
B4
3.
A3
4.
Single Colour
2 Colour
(1)
) as appropriate to manually switch between colour copying and black and white copying.
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Touch the [Colour Mode] key.
0
Output
File
Quick File
Set the colour mode.
OK
(1) Select the colour mode.
(2) Touch the [OK] key.
(2)
21
) or the [BLACK & WHITE

Advertisement

Table of Contents
loading

Table of Contents