Sharp MX-2300G Manual page 11

Start colour copying.
When one or more special modes are selected, the
list of the selected special modes. This lets you check what special modes are selected and the settings of each mode.
To cancel all settings, press the [CLEAR ALL] key (
When the [CLEAR ALL] key (
screen.
To stop scanning of the original and copying, press the [STOP] key (
When the [STOP] key (
in the message screen.
Start copying.
Start black and
white copying.
) is pressed, all settings selected to that point are cleared and you will return to the base
) is pressed, a message will appear asking you if you want to cancel the job. Touch the [Yes] key
Start scanning the original(s) and making copies.
key appears in the base screen. Touch the
).
).
10
key to display a