Glass - Sharp MX-2300G Manual

4
• Up to 999 can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
5
Even if a colour mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key
( ) is pressed.
To cancel scanning of the original and copying...
Press the [STOP] key (
MAKING A COPY USING THE DOCUMENT GLASS
To make a copy of a book or other thick original that cannot be fed through the automatic document feeder, open the
automatic document feeder and place the original on the document glass. This section explains how to make a copy
(1-sided copy of a 1-sided original) using the document glass.
1
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
7
2-Sided Copy
) and then enter the correct number.
or
).
Original size
detector
Set the number of copies (sets) with the
numeric keys.
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key
( ).
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5 or
5-1/2" x 8-1/2"
B4 or
B5 8-1/2" x 14"
A4 or 8-1/2" x 11" A3 or 11" x 17"
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
12
Document glass scale
mark
B5R
A4R or 8-1/2" x 11"R
)