Copying A Large Number Of Originals; At Once (Job Build) - Sharp MX-2300G Manual

COPYING A LARGE NUMBER OF
ORIGINALS AT ONCE (Job Build)
When copying a very large number of originals, this function allows you to divide the originals into sets and feed each
set through the automatic document feeder one set at a time.
Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the
maximum number that can be inserted.
This function is convenient when you wish to sort copies of a large number of originals into multiple sets because all
originals are copied as a single job, which saves you the trouble of sorting the copies that would be required if the
originals were divided into separate copy jobs.
When scanning the original in sets, divide the sheets so that no set has more than the number of paper that can be
loaded and then scan from the set with the first page. The settings that you select for the first set can be used for all
remaining sets.
Sorting the copies of a large number of originals into 2 sets
Originals
1
Indicator
line
1
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
2
Settings
Auto
Exposure
100%
Copy Ratio
Special Modes
Margin Shift
3
Pamphlet Copy
1
101
Original A4 2-Sided Copy
Output
Plain
A4
Special Modes
A4
1.
A4R File
2.
B4
3.
A3 Quick File
4.
OK
Dual Page
Erase
Copy
Job Tandem
Build Copy
(1) (2)
Originals are
scanned in
separate sets
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Place the originals face up. Insert the originals all the way into
the document feeder tray. The stack must not be higher than
the indicator line.
Touch the [Special Modes] key.
0
Select Job Build.
1/4
(1) Touch the [Job Build] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
69
1
1