Sharp MX-2300G Manual page 99

Paper Select
A4
A4R
B4
A3
7
8
To cancel scanning of the original and copying...
Press the [STOP] key (
To cancel tab copy...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Initial Tab Copy Setting
The default image shift width can be set from 0 mm to 20 mm (0" to 5/8"). The factory default setting is "10 mm (1/2")".
Plain A4
Plain
Plain
Plain
Plain
or
).
Select settings for using tab paper.
OK
(1) Touch the appropriate paper type key.
(2) Touch the [Tab Paper] key.
Bypass Tray Type/Size Setting
Select the paper type.
Plain
Pre-Printed
Recycled
(3) Touch the [OK] key.
Bypass Tray Type/Size Setting
Type
Tab Paper
(4) Touch the [OK] key.
Paper Select
A4
A4R
B4
A3
When the [OK] key is touched, you will return to the job
detail setting screen. Touch the [Job Detail Settings] key
to return to the base screen of copy mode.
Press the [COLOUR START] key
( ) or the [BLACK & WHITE
START] key (
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time.
If you are using the sort function or other function that
requires all originals to be scanned before the copies are
printed, you must use the same [START] key that you used
to scan the first original to scan each of the remaining
originals.
98
Letter Head Thin Paper Transparency
Pre-Punched Heavy Paper Tab Paper
Colour Labels Envelope
Type
Size
Auto-Inch 1 / 2
8 x11
Auto-AB
A4
A4
Plain
Tab Paper
Plain
Plain
Plain
).
Cancel
1/2
1/2
OK
2/2
OK