Table of Contents
Advertisement
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either
automatically with the AUTO IMAGE key or manually with the
REDUCTION key, ENLARGEMENT key, or ZOOM keys. The zoom
function enables precise copy ratio selection from 50% to 200% in
1% increments.
KEY OPERATOR A total of four extra presets, two each for reduction
and enlargement, can be added.
OPERATOR'S GUIDE.
1.
2. B4
2
1
3. A3
3
REDUCTION
1
4
7
AUDIT
0 /
CLEAR
Downloaded from:
http://www.usersmanualguide.com/
A4
h
A4
TRAY SELECT
AUTO IMAGE
ENLARGEMENT
100%
<M112>
ZOOM
3
2
5
6
START
8
I
I
See page 15 of the KEY
Automatic selection
Set the original(s) face down in the RADF tray and
1
adjust the original guides to the size of the originals.
The original size will be detected and shown on the message
display.
Use the TRAY SELECT key to select the paper tray with
2
the desired paper size.
NOTE:
This feature will not work when a non-standard size original or
paper is used.
Press the AUTO IMAGE key.
3
The best reduction or enlargement ratio for the selected paper
size will be automatically set.
If the original size and format selected does not correspond to
standard reduction/enlargement ratios for the selected paper
tray, then the following message will appear to indicate the
right original placement.
PLEASE CHANGE THE DIRECTION OF THE
ORIGINAL FROM
Enter the desired number of copies.
4
Press the START key.
5
To cancel the automatic reduction/enlargement mode, press
the 100% key.
TO
.
17
Advertisement
Table of Contents
