Appendix; How To Use The Home Mark - IAI ROBO Cylinder RCS2 Series Operating Manual

Appendix

How to use the home mark

 Please affix these marks to the actuator as home markers as needed.
Contents of sticker
Home mark scale x 4
(Scale: 1 mm graduation mark, 10 mm width)
 Peel off the marks from the base sheet.
Note 1. Every mark has sticky back.
Example of Use
[1] Used as home position
 Place the marks when the actuator is stopped at home position.
[2] Used as stop positions
102
Home mark sticker
Home mark x 4
2. Remove smear and stain from the surface.
3. Avoid label or nameplate as a marking location.
x 1 sheet
On the slider
Motor
On the base
On the slider
Motor
At stop positions on the base