Die; Operating; Hold-Down Clamp - Hettich BlueMax Mini Typ 3 Operating Manual

Operation

Die

Mount the insertion die onto the swivel unit with two hexa-
gon socket screws. If you wish to use any other die, e.g. for
connecting fittings or mounting plates, you must exchange
the hinge insertion die, including the fixing screws.
Depth can be adjusted at the threaded studs located on the
front face of the insertion dies.
Fig. 26: Insertion die
en

3. Operating

WARNING
Warning - Hand injuries!
While the machine is operating, always keep your hands
away from the drill bits, hold-down clamps and insertion
die to prevent injury.
They can be activated either by means of the manual switch
valve or foot pedal. To do this, press the manual valve or
foot switch until the drill bits have reached the end position
(drilling depth stop). On letting the switch go, the drilling
head returns to the home position.
66

Hold-down clamp

The hold-down clamps are automatically tensioned
on actuating the manual valve or foot pedal and can be
released again by pressing the yellow button
Fig. 27: Yellow button: Releasing the hold-down clamps
.
1
1