Introduction; Rating Plate; Information For The Owner - Hettich BlueMax Mini Typ 3 Operating Manual

Introduction

1. Introduction
These operating instructions are intended to make it easier for you
to become familiarised with the machine and use its capabilities
in the proper manner. The operating instructions contain
important information on operating the machine in a safe,
proper and cost effective manner. Following them will help to
avoid hazards, repair costs and down times, enhance reliability
and prolong service life.
Existing national regulations on preventing accidents and on
protecting the environment are also applicable.
The machine must only be assembled and installed by persons
instructed to do so by Paul Hettich GmbH & Co. KG. This also
applies in particular to starting it up for the first time.
The operating instructions must be available at the machine all
the time. The operating instructions must be read and applied by
any person entrusted with working with / on the machine, e.g.:
• Operation
• including setting up, troubleshooting while working, disposal
of production waste, care, disposing of consumables and
auxiliary substances,
• Maintenance
• Servicing, inspection, repair
• Handling

2. Rating plate

NOTE
The rating plate is located on the machine.
The rating plate shows the following information:
State all of the above details when requesting technical
information and ordering replacement parts.
Reproduction either in whole or in part is not permitted.
Manufacturer
Address
Type designation,
machine numbers
Year of manufacture
Technical specifications
(e.g. nominal pressure)

3. Information for the owner

In addition to these operating instructions and the accident
prevention regulations in force in the country of use or at
the place of application, it is also necessary to follow the
recognised code of safe and proper working practice.
Without the consent of Paul Hettich GmbH & Co. KG, the
machine owner must not make any additions, alterations or
modifications to the machine that may affect safety.
Replacement parts used must meet the technical
requirements defined by Paul Hettich GmbH & Co. KG. This is
always ensured when using genuine replacement parts from
the applicable replacement parts list.
Only ever deploy trained or instructed personnel and clearly
define personnel responsibilities with regard to operating,
servicing and repair.
en
45