Labelling - Hettich BlueMax Mini Typ 3 Operating Manual

Description of the machine

5. Labelling

Area: entire machine
Warning of the risk of hands getting crushed
en
Fig. 9: Labelling – entire machine
Area: hold-down clamps
Warning of the risk of hands getting crushed
Fig. 10: Labelling – hold-down clamps
Area: protective cover on tools
Warning of the risk of hands getting crushed
Fig. 11: Labelling – drilling and insertion unit
56
Area: motor / drive
Reminder to unplug the mains power plug before changing
tools
Fig. 12: Labelling – motor / drive
Area: entire machine
Reminder to unplug the mains power plug and disconnect
compressed air before changing tools. Main switch does not
disconnect the machine from the compressed air system.
Fig. 13: Labelling – entire machine
Area: controls
Reminder to read the operating instructions before starting
up the machine
Fig. 14: Notice - Controls