Reconfiguring An An-X From An Unknown State - ProSoft Technology AN-X-MOD User Manual

Table of Contents

AN-X-MOD (Master) Page

Reconfiguring an AN-X from an Unknown State

It sometimes happens that an AN-X has been previously configured with

an IP address that causes it to be inaccessible on the current Ethernet

network. To reconfigure it to a known state, run the command

Configuration/AN-X IP Settings to start the AN-X IP Configuration

Wizard and reconfigure AN-X.

Table of Contents

Do you have a question about the AN-X-MOD and is the answer not in the manual?

An-x-mod master