Remote Programming Interface - Synectix EZ VMS Lite User Manual

4.0

Remote Programming Interface

EZ VMS Lite provides a user-friendly screen based GUI interface to program the various
parameters of the EZ VMS Lite. However, it must be noted that this interface allows only
the parameters to be programmed and any voice recordings like greetings, names etc.,
must be recorded by calling into the unit and going through the touch-tone
programming.
Launch the EZ VMS Lite Remote Programming Interface (RPI) application and wait for
the main screen to appear.
The main menu consists of the following options :
File

Connection Set Up

Update Date & Time

Settings

Reports

About

When the application starts up, only the options "File, Connection Set Up, Update Unit
Date & Time, and About" are enabled. All the other menu options are enabled as shown
below, once an existing binary file is loaded successfully or a new binary file is imported
from a EZ VMS Lite unit.
EZ VMS Lite
39